CORPORATE
Türkiye’s only single-source domestic hydraulic dynamometer & test-systems manufacturer. Focused engineering since 1989.
Our company installs facilities that perform load tests on rotating machines under monitorable and repeatable laboratory conditions, and manufactures all conditioners, measuring instruments, mechanical systems, control units, software and systems — including the dynamometer — used in these facilities. We are the single-source hydraulic dynamometer (Bremse) and test-systems producer of Türkiye under our own design, name and brand.
All our products — active (AC), eddy-current and hydraulic (water-brake) dynamometers, consumption-measurement units, conditioners, mechanical and electronic systems, analyzers and software — are our own design. Establishing emission, NVH and R&D test rooms that answer the automotive key industry’s development, certification, validation and homologation needs, and manufacturing every device and system used in them, is one of our leading activities.
Our founders, focused solely on test systems since 1989, accumulated experience by providing representation and integration services between 1989 and 2007, then began domestic production with 80%+ local contribution in response to sector demand. Today we have the capacity for 20+ turnkey test-facility projects per year, and aim to grow by channeling income into R&D, national and international market development, and qualified-personnel training.
Thanks to our command of software development, electronic and mechanical design and precision manufacturing, beyond test instruments we also design and produce items with limited domestic supply — such as 6-axis robot arms and defense-specific control systems. We deliver significant, quality-enhancing upgrades to old dynamometers and devices at defense-industry overhaul plants and universities, phasing out low-quality legacy technology in favor of high-quality domestic products with modern, accurate control.
We are working to turn the automotive key industry’s tendency to use foreign-origin systems into an opportunity for domestic procurement. We have raised our products’ technology and quality and are becoming known on international platforms through fairs, B2B meetings and market-development work. Our high-local-content manufacturing becomes more cost-competitive abroad after each devaluation while quality keeps rising — and many European integrators have begun sourcing their products from us at OEM level.
We do not hesitate to share our knowledge and experience in testing, test instruments and test engineering with prime contractors and public institutions working on critical national projects, even on non-commercial terms — we are proud to contribute to national capability and international competitiveness. We are ready to provide the most economical yet high-quality solution, to strengthen domestic products by financing them, and to serve as the turnkey test-facility installer on such projects.
Test systems and nothing else since 1989. We build the facilities that perform load-performance testing of rotating machinery under traceable, repeatable laboratory conditions, and we manufacture all the equipment used in them ourselves. Below are the eight test domains those facilities cover.
Test infrastructure answering product development, certification and validation processes; ECU calibration and component update testing.
Fuel-less running (cold test) and fired running (hot test); at end of line and after overhaul.
Quality control, localization verification and exhaust emission measurement to EURO/EPA regulations.
Pump, crankshaft, piston and similar sub-system and component testing; including landing gear, wheel, flexible joint and gearbox.
1,000–5,000+ hour full-load durability and life testing; destructive testing where required.
Dedicated test cell, end-of-line test line, turnkey facility installation, operation, optimization and engineering services.
Manufacturing verification testing and post-overhaul performance verification; including defense industry overhaul plants.
Dynamometer-equipped training engine sets and variable compression ratio R&D engines; for universities and research laboratories.
As Türkiye’s single-source hydraulic dynamometer and test-systems producer we manufacture 300+ test equipment and provide services, adding at least 5 new products every year. The full portfolio is linked in the Documents section below.
Engine test dynamometer: instruments for load-performance testing of combustion gasoline, diesel or gas engines.
Transmission test system: measures gearbox performance under load. Both may use hydraulic, eddy-current or AC (active) dynamometers; the choice depends on test type and duration.
Which one to buy? For long-duration load tests the hydraulic is ideal (30–40 year flawless life). If motoring/braking transitions are needed, the active dynamometer is preferred — though its maintenance cost is higher.
Real temperature/pressure/flow measurement with calibrated sensors, fully automatic and comparable test reports, precise fuel/air/oil consumption, engine water/fuel/oil/intake-air conditioning, EURO/EPA emission measurement and 1,000–5,000+ hour durability tests.
Post-overhaul quality control and performance reporting, comparability across tests, real physical-property measurement, precise consumption metering, automatic conditioning and single-source automatic control of auxiliary facilities.
Tank and armored-vehicle engines; turbine, turboprop and turboshaft engines; gasoline/diesel and alternative-fuel aircraft engines — precise measurement, fully automatic test steps, and certified, repeatable laboratory-condition reporting.
Thanks to our command of software development, electronic and mechanical design and precision manufacturing, beyond test instruments we can also design and produce items with limited domestic supply.
We work to turn the automotive key industry’s tendency to use foreign-origin systems in critical areas into an opportunity for domestic procurement. Thanks to our high local content our products have become competitive internationally, and many European integrators have begun sourcing from us at OEM level.
For us quality is not merely a certificate but a measurable way of working. We operate under the ISO 9001 quality management system and apply ISO 14001 environmental management, ISO 10002 customer satisfaction and ISO 45001 occupational health and safety systems. Our products meet CE conformity requirements. In line with the expectations of our aerospace and defense customers, AS9100 registration is in progress.
Enabling our customers to produce their own certified test reports is an important goal for us. Our test systems are therefore equipped with calibratable and accreditable measurement equipment, and a reporting infrastructure compliant with international test regulations is established. The customer can thus verify their own product in their own laboratory without external dependency and continue to focus on production.
Our company installs facilities that perform load-performance tests on rotating machinery under traceable, repeatable laboratory conditions, and manufactures all conditioners, measuring instruments, mechanical systems, control units and software used in these facilities, including the dynamometer. It holds the position of Türkiye’s only domestic hydraulic dynamometer and test systems manufacturer in its sector and field.
Our founders have been engaged solely in the test systems business since 1989. They accumulated experience by providing representation and integration services between 1989 and 2007, then began manufacturing with high local content in response to demand from the sector. Today we have the capacity to deliver 20 or more turnkey test facility projects per year, and we aim to grow by channelling our income into R&D, national and international market development and training qualified personnel.
Establishing facilities such as emission, NVH and R&D test cells that answer the product development, certification, validation and homologation needs of automotive key industry companies in particular, and manufacturing all devices and systems used in them, are among our leading activities. Thanks to corporate-structured operations and our standardized CRM application we maintain fast, customer- and solution-focused management.
We do not hesitate to share our knowledge and experience in testing, test instruments and test engineering with prime contractors and public institutions working on critical national projects, even on non-commercial terms. We are proud to contribute to national capability and international competitiveness, and we stand ready to provide the most economical yet high-quality solution and to serve as the turnkey test facility installer.