ENGINE TEST DYNAMOMETERS

Engine Test Dynamometer: Hydraulic, Eddy-Current and Active

Türkiye’s only domestic hydraulic dynamometer manufacturer, since 1989. We design and build the engine test dynamometer in-house, size it to your engine and deliver it with control, measurement and commissioning.

0.1–20,000 HP
Power range
up to 200,000 Nm
Torque
up to 60,000 rpm
Speed
since 1989
In operation
97%+ local content
Manufacturing

Three dynamometer technologies, one manufacturer

The right engine test dynamometer follows from the engine envelope and the test you intend to run. We manufacture all three absorber types, so the recommendation is made on engineering grounds — not on what happens to be in a catalogue.

Hydraulic dynamometer (water brake)

Absorbs power through water friction. Braking only, clockwise and counter-clockwise. A service life of 30–40 years with low maintenance makes it the natural choice for durability, endurance and production quality testing.

Eddy-current dynamometer

Applies load by electromagnetic induction. Braking only, clockwise and counter-clockwise, air- or water-cooled. The standard choice for engine and transmission performance testing.

Active dynamometer (4-quadrant)

Drives as well as brakes, in both directions, with regenerative energy recovery. Required for motoring, friction measurement, transient cycles, hybrid systems and electric motor testing.

Engine test dynamometer — GT General Test

We build the dynamometer ourselves

Hydraulic, eddy-current and active engine test dynamometers are designed and manufactured in-house in Istanbul. Dynamometer, control software and mechanics come from one team, sized to your engine.

Operating quadrants

Whether the dynamometer must drive the engine — not only load it — is often the deciding question.

Dynamometer typeClockwiseCounter-clockwiseBrake (absorb)Drive (motor)
Hydraulic (water brake)✓✓✓—
Eddy-current✓✓✓—
Active (4-quadrant)✓✓✓✓

How we size an engine test dynamometer

Sizing starts from your engine data and test list, never the other way round. The dynamometer is then matched to the shaft line, the mounting frame and the utilities available in your building.

Control and measurement

Every engine test dynamometer is delivered with our in-house TRex control platform. TRex.adv provides full automation, closed-loop speed and torque control, test sequencing and reporting; TRex.con covers essential control at lower cost. Channel resolution is 16-bit.

Where our engine test dynamometers are used

R&D and performance mapping, durability and endurance runs, production and post-overhaul quality testing, and certification support. The same platform covers diesel and gasoline engines, aviation piston engines with propeller speed reduction units, PTO testing of tractors and work machines, and motored cold testing.

Typical configuration: an engine overhaul facility verifies every rebuilt engine before it returns to service. A hydraulic engine test dynamometer runs full-load steps at low operating cost, TRex executes a fixed test recipe, and an automatic report is issued for each engine serial number.

TRex control and reporting — GT General Test

Measurement and reporting with TRex

Test sequences, limit monitoring and automatic reporting run on our TRex control platform. The hardware and the software are ours, adapted to your tests.

Frequently asked questions — engine test dynamometers

What is an engine test dynamometer?

An engine test dynamometer is the machine that loads an engine at a controlled speed or torque and measures the torque it delivers. Power is calculated from torque and speed. Together with the control system, instrumentation and conditioning units it forms the engine test bench.

Hydraulic, eddy-current or active — which engine test dynamometer should I choose?

A hydraulic water brake suits high-power absorption and long endurance runs with low maintenance. An eddy-current dynamometer is the standard choice for engine and transmission performance testing. An active dynamometer is needed when the engine must also be motored — friction measurement, transient cycles or hybrid powertrains.

Can an engine test dynamometer motor the engine?

Only an active (4-quadrant) dynamometer can. Hydraulic and eddy-current dynamometers absorb power only: they work clockwise and counter-clockwise in braking, but cannot drive the engine.

How is torque measurement accuracy maintained?

Torque is measured on a precision load path (±0.5%) and speed to ±1 rpm. Every system is delivered with a torque calibration kit — calibration arm and TSE-certified weights — so the measurement chain can be verified on site.

Test cell — GT General Test

Single source since 1989

As Türkiye’s only domestic hydraulic dynamometer manufacturer, we design, build and commission the complete test system in Istanbul, from the dynamometer to the control software.

Related test systems

Tell us what you need to test

Send us the torque and speed envelope, the tests you plan to run and your facility constraints. Our engineers reply within one business day.

Request a Quote